Electromagnetic Flow Meter DN200,rubber liner for waste water discharge moinitor in effluent treatment plant
Description
The electromagnetic flow meters use Faraday’s Law of Electromagnetic Induction to determine the flow of liquid in a pipe. In a magnetic flowmeter, a magnetic field is generated and channeled into the liquid flowing through the pipe. Following Faraday’s Law, flow of a conductive liquid through the magnetic field will cause a voltage signal to be sensed by electrodes located on the flow tube walls. When the fluid moves faster, more voltage is generated. Faraday’s Law states that the voltage generated is proportional to the movement of the flowing liquid. The electronic transmitter processes the voltage signal to determine liquid flow.
How to use the magnetic flow meter
The ElectroMagnetic flowmeters measure the velocity of conductive liquids in pipes, such as water, acids, caustic, and slurries. Magnetic flowmeters can measure properly when the electrical conductivity of the liquid is greater than approximately 5μS/cm. Be careful because using magnetic flowmeters on fluids with low conductivity, such as deionized water, boiler feed water, or hydrocarbons, can cause the flowmeter to turn off and measure zero flow.
Accuracy
| Pipe Dia (mm) | Velocity (m/s) | Accuracy |
| 3-20 | <0.3 | + 0.25% FS |
| 0.3-1 | + 1.0% Readout |
| 1-15 | + 0.25% Readout |
| 25-600 | 0.1-0.3 | + 0.25% FS |
| 0.3-1 | + 0.5% Readout |
| 1-15 | + 0.3% Readout |
| 700-3000 | <0.3 | + 0.25% FS |
| 0.3-1 | + 1.0% Readout |
| 1-15 | + 0.25% Readout |
Grounding
From flow meter housing terminal G to grounding by minimal 1.6mm2 copper cable, resistivity < 10 Ω.
Technical data
| Product name | Electromagnetic flowmeter |
| Product type | Local|compact display | Remote display | Signal converter |
| Model | IYF-E | IYF-F | IRT |
| Pipe Diameter (mm) | DN10-DN2000 |
| Power supply | 100-240 VAC / 18-36 VDC |
| Accuracy | + 0.5% | + 0.5% | + 0.5% |
| Power consumption | <6w | <6w | <6w |
| Enclosure rating | IP65 | IP68 | IP65 |
| Liquid temperature | -25-120℃ | -25-120℃ | -25-120℃ |
| Ambient temperature | -25-50℃ | -25-50℃ | -25-50℃ |
| Relative humidity | 10-90% | 10-90% | 10-90% |
| Meter ratio | 1:100 | 1:100 | 1:100 |
| Flow direction | Bi-direction flow | Bi-direction flow | Bi-direction flow |
| Communication | RS485 / Bacnet | RS485 / Bacnet | RS485 / Bacnet |
| Signal Output | 4-20mA/Pulse/Frequency | 4-20mA/Pulse/Frequency | 4-20mA/Pulse/Frequency |
Features
- Virtually no pressure loss
- Suitable to meter for wide range of conductive liquid media
- No Moving Parts
- Flanges port connection
- RS485 Standard
- Suitable for Pipes diameter p to 2000 mm
- Large meter ratio
- High Accuracy
- 4 to 20 mA / Frequency / Pulse output
Mounting notice
Model selection
Applicable metering liquid:
- Conductive liquid media, conductivity > 5 µS/ cm
- Various Conductive aqueous solutions, water solutions, acid & caustics
- Abrasive slurries, sludges and grease bearing liquids, corrosive liquid, municipal tap water, waste water,dirty
water, effluent, fibrous, viscous, paper mill, food & beverage
Non-applicable metering medial
- Industrial gas, compressed air, steam, or liquid with large content of gas
- Liquid is non-conductive or low conductive, like lubricating oil, clean oil, cryogenic, cooling water, pure
water, clean gas, etc.
Notice on the selection of local type and remote type:
Remote type means the transmitter and converter display are mounted in different locations, it’s suggested to select
remote type in the following conditions:
- Ambient temperature or converter display sunshine temperature is over 60 ℃
- High humidity or corrosive air existed
- Serious pipe vibration
- Magnetic meter need be suspended or submersible, uneasily read out
- Other abrasive condition
| I | Model | | | | | | | |
| | YF | Electromagnetic flowmeter |
| | TF | Turbine |
| | VF | Votex |
| | LX | Vane wheel |
| | T | Ultrasonic |
| | | E/F display mode | E: compact/local display, F: remote display |
| | | | Pipe Dia | Type (mm) |
| | | | xxxx | 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 400, 500, 600, 800, 1000 |
| | | | Code | Accuracy |
| | | | 1 | + 0.5% FS |
| | | | 2 | + 1.0% FS |
| | | | 3 | + 0.2% FS |
| | | | | Code | Type |
| | | | | N | Converter: 12 / 24 VDC, pulse output |
| | | | | A | Transmitter: 24VDC, 4-20mA outpt |
| | | | | B | Intelligent, Lion battery, no local display |
| | | | | G | Smart, local display, 4-20mA output |
| | | | | C1 | Smart, local display, RS485 |
| | | | | C2 | Smart, local display, HART |
| | | | | | Code | Type |
| | | | | | S | Carbon steel housing |
| | | | | | L | Stainless steel housing |
| | | | | | G | High pressure housing |
| | | | | | HL | 316L electrode |
| | | | | | HTi | Titanium electrode |
| | | | | | HTa | Tantlum electrode |
| | | | | | HC | Hastelloy-C electrode |
| | | | | | L1 | Liquid media |
| | | | | | L2 | Gas media |
| | | | | | P | Pressure compensation |
| | | | | | T | Temperature compensation |
| | | | | | PT | Pressure&Temp. Compensation |
| | | | | | F | PTFE liner |
| | | | | | X | Rubber liner |
| Sample: IYF-E-0100-1-C1-S-HL-L1-F, Magmeter, local display, Dia: 100mm, + 0.5%FS, carbon steel housing, smart, 4-20mA outpt, RS485, 316L electrodes, liquid media meter, PTFE liner |
Pipe Diameter, flow volume and product dimension
| Dia | Flow volume (m3/h) | Product dimension (mm) |
| (mm) | Normal | Min | Max | L | D | H | H1 |
| 15 | 1.5 | 0.06 | 9.5 | 150 | 95 | 272 | 254 |
| 20 | 2.5 | 0.11 | 16.9 | 105 | 277 | 254 |
| 25 | 3.5 | 0.18 | 26.5 | 115 | 283 | 254 |
| 32 | 6 | 0.29 | 43.6 | 140 | 297 | 270 |
| 40 | 10 | 0.45 | 67.8 | 150 | 307 | 280 |
| 50 | 15 | 0.71 | 106.0 | 200 | 165 | 318 | 294 |
| 65 | 25 | 1.19 | 179.1 | 185 | 337 | 313 |
| 80 | 40 | 1.81 | 271.4 | 200 | 352 | 326 |
| 100 | 60 | 2.83 | 424.1 | 250 | 220 | 371 | 344 |
| 125 | 100 | 4.42 | 665 | 250 | 401 | 372 |
| 150 | 135 | 6.36 | 954 | 300 | 285 | 431 | 403 |
| 200 | 250 | 11.3 | 1696 | 350 | 340 | 486 | 460 |
| 250 | 375 | 17.66 | 2650 | 400 | 395 | 547 | 511 |
| 300 | 540 | 25.43 | 3817 | 450 | 445 | 597 | 565 |
| 350 | 735 | 34.62 | 5195 | 505 | 657 | 620 |
| 400 | 960 | 45.22 | 6785 | 500 | 565 | 717 | 675 |
| 450 | 1200 | 57.23 | 8588 | 550 | 615 | 757 | 727 |
| 500 | 1500 | 70 | 10602 | 600 | 670 | 817 | 782 |
| 600 | 2160 | 100 | 15268 | 780 | 917 | 782 |
| 700 | 2950 | 138 | 20781 | 700 | 895 | 1027 | 1068 |
| 800 | 3850 | 180 | 27100 | 800 | 1015 | 1137 | 1157 |
Industrial applications
| Chemical | Food & beverage | Paper mill |
| Metallurgy | Environment protection | Hydraulic |
| Mining | Stainless | Petroleum |
| Pharmacy | Air conditioner | Effluent treatment plant |
| Seawater desalination | Pharmacy | Water treatment |
Competitive advantage
- Compliance to international standards: ISO14001, GB/T28001, ISO9001-2008 / GB/T50430
- Strict process control
- Advanced calibration equipment
- Engineer team
Process control
Calibration equipment
Product Tags:
|
|
Signal Output IP68 Electromagnetic Flow Meter Waste Water Discharge Moinitor For Plant Images
|
